• Ultra Chemical resistance
  (Strong solvent resistance which current resin ribbons cannot achieve.)
• Excellent Heat and Scratch resistance.
• Expanding TTR applications by replacing conventional printing methods
  (Alternative for pre-printed labels, overlamination, etching, etc)

• Automobile label
• Rating plates
• Chemical Drums
• Medical ID labels

B110CU Printing Properties
Image density	Min. 1.5 *
Receiving material	Parallel bar ANSI A* - Serial bar ANSI B or more*
B110CU Data Sheet

B110CU TTR Properties
Grade	Resin
Base Material	Polyester film
Base Caliper	4.5 0.4 μm
Ink Colour	Black
B110CU Durability of Printed Image
Recommended Recieveing Material	FLEXcon P300-HW MTC410 (White PP), 3M 76962 AR MW PET50 (White PET), 76964 AR MS PET50 (Silver PET), 76959 AR MW PP60 (White PP) HANITA COATINGS K05077P ( Glossy )
Chemical Resistance* Samples are printed on a Zebra 140XiIII at 4 inches/sec and the maximum burn temperature. Printed area were wiped 100 times with a cotton cloth soaked in the test solvent at 100gf/cm²)	Ethanol Acetone IPA MEK Toluene Xylene Methylenechloride Brake fluid Unleaded Petrol Thinner	Rank 4 or more Rank 4 or more Rank 4 or more Rank 4 or more Rank 4 or more Rank 4 or more Rank 4 or more Rank 4 or more Rank 3 or more Rank 4 or more
5 = No damage, 4 = Image has slightly faded Bars and characters are readable, 3 = Image has partly damaged Bars are readable Characters are partly unreadable, 2 = Image has partly damaged Bars and characters are unreadable, 1 = Image is wholly damaged
Scratch Resistance*	No damage
Preservation*	Image property remains and free from blocking even after 50° 72 hours preservation
* RICOH standard test METHOD
Recieveing Material With Good Compatibility (The above Durability is not fully applicable)	MADICO DURAFOL (White PET, Silver PET), FLEXcon THERMfilm CHEMGARD Series (Silver, White and Clear PET), 3M 7870E (White PET), Fasson Transfer PET matt white/silver Top Chem Res
Storage conditions	Keep in-door, avoiding high temperature (such as beside heat source), high humidity, and direct sun light.
Usage environment	5-35°C, 30-85%RH
Guarantee period	Finished rolls - 2 years after production
B110CU Certificates / Registration / EU Directives
	BSI 5609 : 1986 Directive RoHS Directive WEEE Directive 2000/53/EC For other directives, please contact us

This grade is available from stock in a wide variety of sizes suitable for many types of thermal transfer printers.

Please contact our sales team for the latest 'Buyer's Guide' that details our stock sizes and our latest prices.

Tel: 01527 517577 Email: sales@tts.eu.com